Service manual
8 of 20
Atomic 3000 LED - Revision A, 11-30-2017
Figure 9:
Removing the back light reflector ass.
Figure 10: Removing back light LED pixel board
Figure 11: Removing back light LED pixel board
3.
Remove the two connectors (2).
4.
Replace the back light reflector assembly.
5. Follow the procedure in reverse order.
2
Replacing the back light LED pixel
board
1.
Remove the back light reflector assembly. See
“Replacing the back light reflector assembly” on
page 7.
2.
Remove the five Torx10 screws (1).
1
3.
Replace the back light reflector LED pixel board
(2).
4. Follow the procedure in reverse order.
2
