Service manual
3 of 20
Atomic 3000 LED - Revision A, 11-30-2017
Figure 1: Safety instructions
Figure 2: Tools
Figure 3: ESD mat and wristband
General information
This service manual contains information about how to
service Atomic 3000 LED.
Safety instructions
Before you carry out service work, read this document.
Installation and service work must comply with local
regulations and accepted codes of good practice.
Observe the safety instructions in the user manual for
the product.
Tools
Make sure that the tools below are available before you
start working on the product:
•
ESD mat and wristband.
•
Torx T10 screwdriver.
•
Torx T20 screwdriver.
•
Torx T25 screwdriver.
•
Small flatheaded screwdriver.
Important! Take the necessary
precautions to prevent static
electricity from damaging the
product during modification or
repair.
