Service manual
14 of 20
Atomic 3000 LED - Revision A, 11-30-2017
Figure 27: Removing connectors
Figure 28: Removing screws on fans
Figure 29: Removing knurled knob
3.
Pull out the fan assembly (2).
Fan A
4.
Remove the connector for the fan assembly (3)
5.
Remove the connector for fan A (4).
Fan B
6. Remove the connector for the fan assembly (3).
7.
Remove the connector for fan B (5).
2
4
3
5
A
B
8.
Remove the four Torx20 screws (6) on each fan.
9. Replace the fans.
10. Follow the procedure in reverse order.
6
6
6
6
Replacing the handle
1.
Remove the knurled knob (1) on each side of the
handle.
1
