Service manual
11 of 20
Atomic 3000 LED - Revision A, 11-30-2017
Figure 18: Removing the two screws
Figure 19: Removing nine connectors
Figure 20: Removing grounding wire
Replacing the main PCB/UI
1.
Remove both back light reflector assemblies. See
“Replacing the back light reflector assembly” on
page 7.
2. Remove the main light engine assembly. See
“Replacing the main light engine assembly” on
page 9.
3.
Remove the two Torx10 screws (1).
1
4.
Remove the nine connectors (2) from the
mainboard.
2
5.
Remove the grounding wire (3).
3
