F200
5
DESKTOP FOLDER
GB
IMPORTANT SAFETY NOTES
Danger of injury! Keep all
loose articles of clothing,
ties, jewelery, long hair or
other loose objects away
from opening!
Danger of injury!
Never insert fingers into opening!
Danger of injury!
Do not spray and flammable liq-
uids or gases into the inlet open-
ing!
In case of danger switch the ma-
chine off with the mains switch, or
with the emergency switch, or un-
plug the machine!
Always unplug the machine from
the mains power supply before
opening the machine!
«
«
«
«
«
The machine may not be operated
by more than one person at any
given time!
The machine was designed for safe
operation by “one person only”.
The machine is not a toy, and is
not suitable for use by children!
The overall technical safety concept
of this machine (dimensions, feed
openings, emergency shutdown de-
vices etc.) does not provide for any
guarantee regarding hazard-free op-
eration by children.
Repairs may only be performed by
trained personnel!
«
«
«
Figure 1
Figure 3
Figure 2
INITIATION
OPERATION
For accurate folds, hold your document at the
top center of the sheets.
The folder functions best when the paper is
held very lightly allowing it to square itself on
the folding rollers.
4. Remove the folded paper from the front slot.
The folder will automatically stop running
once the folding cycle is complete.
-
-
TIP FOR BETTER OPERATION
1. Never put more than four sheets of paper into
the folder at one time.
2. Stapled pages may be used in the folder;
however, do not place staples on the sheets
where the fold will be located (1/3 of the dis-
tance from the top and bottom of the sheet
for letter fold, and 1/2 of the distance between
the top and bottom for half fold).
The stapled end of the paper must enter the
folder first.
3. To fold for a window envelope, insert the pa-
per with the top up, and with the text that will
appear in the window facing the operator.
To fold for a business letter (writing facing in),
insert the paper top up and writing facing
away from the operator.
OPERATION
1. Carefully unwind the wall power supply and
firmly insert the appropriate end into the con-
nector located on the back of the paper folder
(Figure 2).
2. Plug power supply into an appropriate outlet.
3. Insert up to four sheets of paper into the rear
slot,identified by arrows (Figure 3), until the
paper stops, approximately 1 ½” into the fold-
er.
There will be a brief time delay before the
folder starts the folding cycle. Once the folder
starts, release the paper and allow the paper
to be taken by the folder.
PAPER STOP ADJUSTMENT
Before beginning to fold, make sure the paper
stop is properly adjusted for the type of fold and
paper size youare using.
Locate the paper stop adjustment knob (Fig-
ure 1) on the right side of the folder.
To adjust the paper stop, first push on the ad-
justment knob, and then rotate it to the desired
position.
