Marson MT8200S, Руководство пользователя

Страница: 22 / 49

- 19 -
Appendix B) .You will get ‘44’, ‘41’, ‘54’, ‘41’.
2. Make sure Barcode Configurability is enabled (see Chapter 1.2.1)
3. Scan ‘ Set Premable ’
4. Scan ’4’, ‘4’, ‘4’, ‘1’, ‘5’, ‘4’, ‘4’, ‘1’ respectively from Numeric Barcodes (see Appendix C)
5. Scan ‘ Save ’ (see Appendix D)
7.2 Postamble
Enable/Disable Postamble
If Postamble is enabled, your pre-defined Postamble will be added to the rear of each barcode data.
Enable Postamble *Disable Postamble
Set Postamble
You can define up to 15 characters as Postamble using the Set Postamble configuration barcode.
First you need to convert each desired character into Hexadecimal value with the help of ASCII Table
(see Appendix B)
Set Postamble
Example: Set Postamble as ‘DATA’
1. Find the Hexadecimal equivalent of each character in the word ‘DATA’, using ASCII Table (see
Appendix B). You will get ‘44’, ‘41’, ‘54’, ‘41’.
2. Make sure Barcode Configurability is enabled (see Chapter 1.2.1)
3. Scan ‘ Set Postamble ’
4. Scan ’4’, ‘4’, ‘4’, ‘1’, ‘5’, ‘4’, ‘4’, ‘1’ respectively from Numeric Barcodes (see Appendix C)
5. Scan ‘ Save ’ (see Appendix D)