Marson MT8200S, Руководство пользователя

Страница: 12 / 49

- 9 -
1500ms 2000ms
Image Stabilization Period
Image Stabilization Period is the period of time for which MT8200S should wait until the image
stabilizes before switching from detection to scanning ( Scan Period ). Image Stabilization Period is
configurable from 0 to 25.5 seconds (unit = 0.1 sec); by default Scan Interval is 0.4 second.
100ms *400ms
1000ms 2000ms
Image Sensitivity
Image Sensitivity is a range that increases or decreases MT8200S’s reaction time to image change.
When the image changes to the level that conforms to/ surpasses the pre-set degree of sensitivity
MT8200S will switch from detection to scanning ( Scan Period ).
*Normal Low
High Extra High
Same Code Interval
Same Code Interval is the period of time between two consecutive scans on the same barcode. It
prevents MT8200S from scanning the same barcode twice within a pre-set period of time. Please refer to
Same Code Interval under 3.2 Continuous Mode chapter for configuration barcodes.