Marson MT8200S, Руководство пользователя

Страница: 27 / 49

- 24 -
To output Start only:
Example: Barcode data is ‘1234567890123ABC’ ; you want to output the first 13 digits
‘1234567890123’.
1. Find the Hexadecimal equivalent ‘0D’ to the Decimal value ‘13’ using ASCII Table (see
Appendix B)
2. Make sure Barcode Configurability is enabled (see Chapter 1.2.1)
3. Scan ‘ Set Start Length ’
4. Scan ‘0’ and ‘D’ respectively from Numeric Barcodes (see Appendix C)
5. Scan ‘ Save ’ (see Appendix D)
6. Scan ’ Start ’
To output End only:
Example: Barcode data is ‘1234567890123ABC’ ; you want to output the last digits ‘ABC’ .
1. Find the Hexadecimal equivalent ‘03’ to the Decimal value ‘3’ using ASCII Table (see Appendix
B)
2. Make sure Barcode Configurability is enabled (see Chapter 1.2.1)
3. Scan ‘ Set End Length ’
4. Scan ‘0’ and ‘3’ respectively from Numeric Barcodes (see Appendix C)
5. Scan ‘ Save ’ (see Appendix D)
6. Scan ‘ End ’
To output Center only:
Example: Barcode data is ‘12345678900123ABC’ ; you want to output the 4 digits ‘0123’ in the
middle.
1. Find the Hexadecimal equivalent ‘0A’ and ‘03’ to the Decimal value ‘10’ and ‘3’ respectively using
ASCII Table (see Appendix B)
2. Make sure Barcode Configurability is enabled (see Chapter 1.2.1)
3. Scan ‘ Set End Length ’
4. Scan ‘0’ and ‘3’ respectively from Numeric Barcodes (see Appendix C)
5. Scan ‘ Save ’ (see Appendix D)
6. Scan ‘ Set Start Length ’
7. Scan ‘0’ and ‘A’ respectively from Numeric Barcodes (see Appendix C)
8. Scan ‘ Save ’ (see Appendix D)
9. Scan ‘ Center ’