Marshall Electronics V-R185-DLW, Руководство по эксплуатации

Страница: 13 / 18

24
Press RotoMenu ™ knob to edit the IMD Fixed String. Rotate the RotoMenu ™ knob to move the cursor. Press the RotoMenu ™
knob with the cursor on the character to be changed, then rotate the knob to scroll through the character set . Press the
RotoMenu ™ knob to choose a character. The '¬' character indicates an unused (NULL) value in the string. The string entered will
be terminated by the first '¬'. Characters to the right of a '¬' character will be displayed in the menu, but will not be shown in the
IMD string.
Closed Captioning Submenu
Use the Closed Captioning submenu to select the type of captioning stream you would like to decode.
■
Mode
The DLW monitor series provides support for three types of Closed Captioning Modes: 608, 708 and 708
(608 Comp.). Use this section to choose which type of stream you would like to decode.
■
608 Service
The EIA-608 caption protocol defines four channels of caption information. The V-R185-DLW monitor
can only display one of these four channels at any point in time. With the 608 Service selection, you can
select which of the four streams to render on the screen.
■
708 Service
Similar to the EIA-608 caption protocol, the EIA-708 caption protocol can contain multiple streams of
captions. These streams are labeled with a service ID. This menu option allows you to select which
service to render on the screen.
■
608 Color
The EIA-608 caption protocol can define the color for the closed caption text. Use this setting to choose
between using the color defined by the data stream or to override this data with any of the selected
colors.
The default setting for option is Auto.
■
708 Color
The EIA-708 caption protocol can also define the color for the closed caption text. Use this setting to
choose between using the color defined by the data stream or to override this data with any of the
selected colors.
The default setting for option is Auto.
Closed Captioning Submenu
13
■
CTemp/Gamma
Use this setting to choose one of three color temperature / gamma presets:
• D55 (5500K)
• D65 (6500K)
• D93 (9300K)
• Linear (No gamma applied)
■
Monochrome Mode
Use this setting to enable monochrome mode. Only the luminance of the image will be displayed as a grayscale picture.
■
Blue-Only Mode
Use this setting to enable Blue-Only mode. This mode displays only the blue color component of the image, switching off the
red and green components. Use this mode when calibrating the monitor to SMPTE color bars with the following procedure:
1. Allow the monitor to warm up for at least 5-10 minutes.
2. Display SMPTE split-field color bars on the monitor using an external source.
3. Enable Monochrome mode .
4. Locate the pluge pattern (super black, black, and gray bars) at the lower-right corner of the screen. Adjust the Brightness knob until there is no visible
difference between the super black and black bars, but the gray bar is still visible.
5. Adjust the Contrast knob until an even grayscale appears along the top bars.
6. Disable Monochrome mode .
7. Enable Blue-Only mode and adjust the Color knob so that the outermost bars (white and blue) appear to match in brightness.
■
Pixel-to-Pixel Mode
Use this setting to enable Pixel-to-Pixel mode.
Video Configuration Submenu