OWNER’S MANUAL
MODEL DH5F-333WND – HHC FOR WENDY’S MODERN LAYOUT
MODEL DH5G-3333WND AND DH5H-3WND – HHC FOR WENDY'S IMAGE LAYOUT
162880 RV021814
Copyright © 2013 Marshall Air Systems, Inc.
All Rights Reserved.
11
REPLACEMENT PARTS
- Blanket, Heater 120V
For models DH5F-333WND and DH5H-3WND
These heating blankets are used in the bottom
heaters of each deck. A defective blanket could
cause non-heating of the associated deck
bottom heater and therefore an undesired
change in the food product quality.
- Blanket, Heater 120V
For models DH5F-333WND and DH5H-3WND
These heating blankets are used in the top
heaters of each deck. A defective blanket could
cause non-heating of the associated deck top
heater and therefore an undesired change in the
food product quality.
- Blanket, Heater 120V
For models DH5G-3333WND
These heating blankets are used in the bottom
heaters of each deck. A defective blanket could
cause non-heating of the associated deck
bottom heater and therefore an undesired
change in the food product quality.
- Blanket, Heater 120V
For models DH5G-3333WND
These heating blankets are used in the top
heaters of each deck. A defective blanket could
cause non-heating of the associated deck top
heater and therefore an undesired change in the
food product quality.
- Connector, Strain Relief
For models DH5F-333WND, DH5G-3333WND
and DH5H-3WND
Strain relief used with air circulator cord sets
and should be replaced if
missing or damaged.
- Connector, Strain Relief
For models DH5F-333WND, DH5G-3333WND
and DH5H-3WND
Strain relief used with main power cord
and should be replaced if missing or damaged.
- Control
For model DH5F-333WND (Deck 1)
Time/temperature controller factory pre-
programmed according to Wendy's authorized
settings. Replace if the controller is not
operating according to specs or if it won't turn on
when 8.5VDC is supplied to it.
- Control
For model DH5F-333WND (Deck 2)
Time/temperature controller factory pre-
programmed according to Wendy's authorized
settings. Replace if the controller is not
operating according to specs or if it won't turn on
when 8.5VDC is supplied to it.
- Control
For model DH5F-333WND (Deck 3)
Time/temperature controller factory pre-
programmed according to Wendy's authorized
settings. Replace if the controller is not
operating according to specs or if it won't turn on
when 8.5VDC is supplied to it.
Part Replacement Time: 43 min
Part Replacement Time: 43 min
Part Replacement Time: 41 min
Part Replacement Time: 41 min
Part Replacement Time: 6 min
Part Replacement Time: 6 min
Part Replacement Time: 19 min
Part Replacement Time: 19 min
Part Replacement Time: 19 min