MPAAD User Manual
19
Placing the MPAAD securing device into
a packing bag
The MPAAD securing device can be stored only in a packing bag designed for this
purpose.
Leading the cord through the pad:
1.
Lead the cord through the pad center (1).
2.
Then lead the cord to the openings marked with numbers 2, 3, 4, 5.
3.
Lead the cord running through the center to a sign that informs the packing staff
about the precise length.
4.
Take the end of the cord pulled from the opening No. 5 and needle it in between the
cord running between the openings No. 3 and 4.
5.
Let the cord end stick out by ca 15 mm.
6.
The cord that has been led along its entire length as described above is fixed by
friction, which prevents its shifting.
7.
In the area between the openings 2 – 3 and 4 – 5 the cord creates the surface with
which the pad aligns onto the body of the pyro cartridge.
Completing
The device must be completed by an authorized person. First, insert the cord and the
pad into the device. The cord is inserted into the pad in a unique way and therefore it is not
necessary to secure its ends with a knot. (Cord installation procedure – picture 1).
Put the device into the pocket sown onto the back padded piece, the display facing the
translucent plastic plate. Lead the cord through the opening in the pocket and then take it
through the bushing pressed onto the bottom of the packing bag of the reserve parachute.
Stabilise the device inside the pocket and the packing bag is then ready for packing.
The reserve parachute can be packed only by a person with valid authorization. Once the
reserve parachute has been packed, the function of the device has to be checked.
PDF byl vytvo
ř
en zkušební verzí FinePrint pdfFactory