MPAAD User Manual
13
•
Turn the battery cells by 90°
to insert the battery into the device body, the
inscriptions on the battery facing up.
Once the battery has been installed, accommodate the cable in the through on the
right, in the central part of the body.
•
Attach a lid and tighten the screws gently so as not to damage the thread or the bolt.
For the mounting of the cap onto the instrument body are used special screws that
must be tightened by means of the socket spanner No. 2 – the spanner will be
plugged with ist longer side into the hole in the screw head. The shorter side of the
spanner No. 2 made the producer purposely squashed flat so that the use of this side
of the spanner for the screw tightening would be avoided.
Note: Valid for the product dispatched from 08/2004.
•
Check the device by turning it on.
4.
Chopping mechanism replacement
Its replacement can be carried out only by a duly informed parachute technician or by a
technician trained by the manufacturer!
If activated, a new spare pyrotechnic chopping mechanism will be provided free of charge
(only postage will be charged). This will apply only if the manufacturer is then sent a report
(FAX, mail, post) giving details about the respective circumstances (see the form).
Chopping mechanism replacement procedure:
•
Carefully remove the pyro cartridge from the central part of the body and disconnect
its connector.
PDF byl vytvo
ř
en zkušební verzí FinePrint pdfFactory
