MPAAD User Manual
11
HEAD V
Assembly
The structure of MPAAD is new and differs from the structure applied to the most
frequently used devices. Therefore, it does not allow for the use of available assembly
components built in a majority of currently used parachute sets. However, completed tests
proved that minor adjustments make MPAAD suitable for mounting into most currently
used parachute sets.
Note:
The presentation of the MPAAD device for the leading foreign manufacturer of parachute
equipment has not yet taken place. The manufacturer’s agreement is required for the
mounting of a MPAAD device into a parachute system.
HEAD VI
Maintenance
1.
Special maintenance
The device does not require any special maintenance. The device performs continual
automatic checks (battery, internal circuits, chopping cartridge).
2.
Proper function check
The user can easily check the proper operation of the MPAAD device by looking at the
display.
-
The real-time clock must correctly count down the time (stand-by mode).
-
The height on the device display must correspond with the height at the altimeter
(jump-down mode).
Note:
Even a more thorough device check is relatively simple. However, it requires a certain level
of knowledge. Therefore, it can be completed only by a person trained by the manufacturer.
PDF byl vytvo
ř
en zkušební verzí FinePrint pdfFactory
