Marquis 720 FLY, Руководство пользователя

Страница: 99 / 126

7027 • A2 07/11 87
m
ainTenanCe
s
eCTion
7
The owner is responsible for priming and painting ALL underwater metal components . Use a high-quality primer and anti-fouling paint .
Reprime and repaint the components when bare metal is visible .
NOTE: Painting the propellers requires special care to attain a smooth surface . A rough surface on the propellers will
seriously affect the yacht’s performance .
Contact your Marquis Dealer’s Service Department if additional information is needed on priming and painting the underwater metal
components .
CAULKING AND SEALANTS
Deck fittings, rail bases, windows, and all underwater fittings have been sealed with the finest quality sealants . The sealants, however,
do not last indefinitely . The working action of the yacht, and the expansion and contraction caused by variations in outside tempera-
ture, eventually break down the sealant .
Fittings that have begun to leak must be resealed . Remove the fitting and clean the old sealant from both mating surfaces . Reseal the
fitting using the sealant recommended by your Marquis Dealer .
STAINLESS STEEL RAILS AND HARDWARE
Stainless steel is NOT rust-resistant nor is it stain-resistant . When left in contact with the marine environment stainless steel
DOES rust and corrode . Proper care helps keep the stainless fittings on the yacht looking bright and shiny .
Clean the stainless steel rails and fittings after each outing with either soap and water or glass cleaner .
If the yacht is used in salt water, clean the rails and fittings at least once every week, even if the yacht hasn’t been used since the last
cleaning .
If rust appears on the metal, remove it immediately with 3M Metal Restorer (Marquis part number 051131) . Failure remove rust leads
to irreversible pitting . Use brass, silver, or chrome polish to remove rust on stainless steel . Wax the stainless fittings and rails to help
protect both surfaces from the elements and keep them looking their best .
Use the same wax on the fiberglass surfaces of the yacht .
NEvEr
NEVER USE SANDPAPER, STEEL WOOL, OR OTHER AbRASIVES TO CLEAN STAINLESS STEEL FITTINGS OR •
RAILS.
NEVER USE MINERAL ACIDS OR bLEACH TO CLEAN STAINLESS STEEL.
•
NEVER LET STAINLESS STEEL COME INTO PROLONGED CONTACT WITH IRON, STEEL, OR OTHER METALS PRO- •
LONGED CONTACT COULD CAUSE CONTAMINATION LEADING TO RUST OR CORROSION.
DECORATIVE STRIPING TAPE
A variety of decorative stripes are applied to exterior of the yacht . Striping tapes are custom-made to Marquis’s color and size speci-
fications . Replacement striping tape is only available through Marquis Dealers . To remove a damaged section of tape, heat the area
with a hair dryer . Heating with a hair dryer softens the adhesive, and makes the tape easier to remove . Use acetone to remove the
adhesive residue .
cauTiON
AVOID SPILLING FUEL ON THE STRIPING TAPE WHILE FUELING. FUEL DAMAGES THE STRIPING TAPE.
HATCHES AND WINDOWS
The hatch frames are fabricated from aluminum or stainless steel . Some frames are painted with enamel . To clean both the painted