Marquis 720 FLY, Руководство пользователя

Страница: 47 / 126

o
perating tHe
aC e
qUipment
Power to the AC components is controlled by circuit breakers, and individual controls for each co mponent .
Three AC Circuit Panels are available onboard:
AC Bus 1 Distribution Panel (Engine Room) •
AC Bus 2 Distribution Panel (Engine Room) •
AC Distribution Panel (Salon Aft) •
Additionally, AC Main circuit breaker groups are located near the shore power connectors .
The electricity to the AC components and component controls can be controlled by switching the breakers from the above panels ON
or OFF . The breakers also protect the electrical system by automatically disconnecting the circuit from the power source in the event
of a short or overload .
NEvEr
NEVER RESET A bREAKER THAT HAS AUTOMATICALLY TRIPPED WITHOUT FIRST CORRECTING THE PRObLEM. FAIL-
URE TO CORRECT THE PRObLEM MAY CREATE A DANGEROUS SITUATION.
NOTE: A circuit breaker location may be labeled, but no circuit breaker is present . In this situation, the component named
on the label is an option that is not installed on the purchased model .
AC MAIN CIRCUIT bREAKER GROUP(S)
When using a shore power source to supply AC power to the yacht, the power is routed through the AC Main circuit breaker group
before the power supplied onboard . Each cablemaster or shore power cord has a dedicated AC Main circuit breaker group . Power
flows to the AC Bus 1 or 2 Distribution Panel when the AC Main circuit breaker group is ON .
The circuit breaker groups for the shore power connectors are located inside the lazarette storage/crew quarters PORT access hatch
and generator access area .
WarNiNg
DO NOT OVERLOAD THE ELECTRICAL CIRCUITS. TURN OFF ALL DEVICES CONNECTED TO THE CIRCUIT, THEN SWITCH
THE bREAKER ON AGAIN IF AN EXCESSIVE LOAD TRIPS A CIRCUIT bREAKER.
AC bUS 1 and AC bUS 2 DISTRIbUTION
PANELS
The AC Bus 1 and AC Bus 2 Distribution Panels are located in
Engine Room on the forward bulkhead . Both panels manage a
majority of the yacht’s AC power system, and control the flow of
electricity to the salon AC Distribution Panel .
The AC Bus 1 and AC Bus 2 Distribution Panels contain the cir-
cuit breakers described in this section . The panels also contain
additional controls and meters described in the vendor literature
entitled
Marine Switch gear Systems Installation and Operating
Manual .
AC bUS 1 DISTRIbUTION
PANEL AC bUS 2 DISTRIbUTION
PANEL
35 7027 • A2 07/11
aC e
leCTriCal
s
YsTem
s
eCTion
3