Marquis 720 FLY, Руководство пользователя

Страница: 72 / 126

Forward and Aft Waste Plates are located on the forward STBD side deck (Forward Plate is the forward of the two) 2a .
Crew quarters Waste Plates are located on the PORT Transom 2b .
Attach the pumpout vacuum hose to the WASTE deck fitting . Make sure to have a secure connection between the transfer 3 .
hose and the deck fitting .
Activate the pumpout vacuum . The pumpout vacuum transfers onboard waste to the dockside holding station .
4 .
Flush the waste tank(s), after all waste is removed by: 5 .
Pour several gallons of fresh water through the WASTE deck fitting . 5a .
Reattach the vacuum hose to the deck fitting, and activate the pumpout vacuum to remove the fresh water and any 5b .
remaining waste .
Replace the deck plate(s) 6 . .
Remove the STDB waste tank deck plate labeled WASTE using the supplied removal tool . 7 . The WASTE plate is located on the
STDB side deck just forward of the fresh water deck plate . Refer to Section 9: Deck Plates for the exact location of the plate .
Repeat steps 3, 4, 5, and 6 for the STDB waste tank . 8 .
A Tip From Marquis!
The wASTe deck plate is not connected to the fitting and dOeS nOT FlOAT. be careful not to drop the deck plate
when removing. you can order a replacement from your Marquis dealer if you do lose the plate. wASTe deck plates are
dropped overboard frequently enough that we suggest you carry an extra plate in your onboard spare parts kit.
o
verBoard
d
isCHarge
Discharging gray water overboard is against the law in some areas of the United States . It is the yachter’s responsibility to maintain
compliance with all applicable federal, state, and local laws when using the overboard discharge system . Significant penalties result
for discharging waste overboard .
Discharging waste from the waste tanks into the sea is illegal in certain coastal areas of the world . For this reason, Marquis offers an
optional overboard discharge system on yachts that are exported or used in the coastal areas of the United States .
With the overboard discharge system, waste is flushed from the toilets to the waste storage tank . In locations that overboard
discharge is legal, the tanks can be discharged directly overboard .
If overboard discharge is not legal at your location, either wait until an area is reached where it is legal, or use a dock side pumpout
station to empty the waste tanks .
EmPTyINg ThE wasTE TaNk
Open the appropriate overboard discharge seacock located at the transom bilge area . 1 .
Forward and Aft Seacocks are located beneath the hatch in the forward master stateroom sole . 1a .
Crew quarters Seacock is located in the STBD bilge compartment . 1b .
Turn the waste tank selector Y-valve to the selected tank to empty, either FORWARD or AFT . 2 . The Y-valve is located in the
engine room near the Overboard Discharge Seacock . Refer to Section 9: Engine Room for the exact location of the Y-valves .
Provide power to the circuit breakers on the DC Bus Distribution Panel 3 .
Switch 4 . ON the OVERBOARD PUMP FORWARD, and/or OVERBOARD PUMP CREW qUARTERS circuit breakers, located
on the DC Bus Distribution Panel .
Turn ON the appropriate Overboard Discharge Pump Switch . The switch is located near the overboard discharge seacock .
5 .
The switch activates the overboard discharge pump, and pumps the waste overboard . Refer to Section 9: Engine Room for the
exact location of the seacock .
cauTiON
60 7027 •A2 07/11
i
nTernal
s
YsTem
s
eCTion
4