Promote your assets
11
Figure 3-3
Press the gas pump control key
（
）
, the instrument starts to
measure(repress the gas pump control key, the measurement will stop).At this time,
the larger value in the center of display screen is the measuring value. The smaller
value at the lower right corner is the maximum measuring value since the gas pump is
turns on during this measurement. If the instrument adopts the manual store
model(operation shall be introduced subsequently), press up key
（
）
for store
the measuring data, the "SF6" at top left corner will be displayed reversely prompting
the data has been saved.
Press the gas pump control key
to shut down the gas pump and end the
measurement; Long press
, it appears the countdown interface, the system is
power off after the screen shows the word "close".
3.3
3.3
3.3
3.3
Instrument menu operation
Press the CL key after finishing the preheating procedure to enter the interface
shown as Figure 3-4 , press up/down key to input the value and
p
ress confirm key to
shift right and save, the instrument will enter into the main interface shown as Figure
3-5 after inputting the correct password(Factory primitive password is "0000" , the
user can reset the password
)
.
Figure 3-4 Input password interface Figure 3-5 Main menu interface
Figure 3-5 shows the main menu interface of the instrument, data record and
system state has two- stage menu, instrument calibration and instrument settings have
three-stage menu structure. The menu structure of MSF6-1000 shown as Figure 3-6:
Содержание MSF6-1000
Страница 34: ...Promote your assets 33 Figure 4 10 Figure 4 11...
