Page 68 / 86
Technical Notice CSO/CPO V1.1 / 10.14
9 Options
9.1.14.4 '-' key functions:
A.
-
key: show input and output statuses
B.
To use this function, you need to press and hold the
-
key. The screen appears as shown opposite.
Where the pixels around an input or output are
highlighted, the corresponding input or output is
active (1).
• Voltage present for an input
• Relay contact closed for an output
Where the pixels around an input or output are not
highlighted, the corresponding input or output is
inactive (2).
• Voltage not present for an input
• Relay contact open for an output
The content of the Settings menu may vary depend-
ing on the program installed. To find a setting, use
the settings table.
See section “9.1.14.8 Settings table (variable)” on
page 74.
Fig. 9-17 : Inputs and outputs status
(1)
Inputs i1 to i4 and iB to iE
(2)
Outputs O1 to O4
(2)
(1)
