Technical Notice CSO/CPO V1.1 / 10.14
Page 35 / 86
CPO 510/810 models 6
6.2
Handling
The unit must be transported flat and must not sustain any shocks.
6.3
Installation
The unit is normally installed close to the machine being cooled, as indicated on the installation plans.
During the installation, allow for a free space of about 0.5 m around the refrigeration unit. This distance
must be 1 m in front of the exhaust fan. With these precautions, both ventilation and maintenance access
will be made easier.
6.3.1
Hydraulic connections
Except where specifications state otherwise, the connections between the refrigeration unit and the ma-
chine being cooled can be made with pipes with a cross-section diameter at least equal to that indicated
in the technical specifications.
See section “6.1.3.5 Hydraulic circuit” on page 34.
6.3.2
Electrical connections
E
LECTROCUTION
The machine cabinet must be disconnected from power while connecting the cables.
Power cable installed with a 3m length (or according to customer specifications).