marklin LGB 28445, Руководство пользователя

Страница: 10 / 41

10
Programming
• The characteristics can be changed repeatedly using the Configuration Variables
(CV).
• The CV numbers and the CV values are entered directly.
• The CVs can be read and programmed repeatedly. (Programming is done on the
programming track.)
• The CVs can be programmed in any order desired. (PoM - Programming can be
done on the main track). PoM is not possible with CVs CV 1, 17, 18, and 29. PoM
must be supported by your central controller (Please see the description for this
unit.).
• The default settings (factory settings) can be produced repeatedly.
• 14 or 28/126 speed levels can be set.
• All of the functions can be controlled according to the function mapping (see CV
description).
• See the CV description for the DCC protocol for additional information.
We recommend that in general programming should be done on the programming
track.
SERVICE
Lubrication
Oil each of the axle bearings now and then with a drop of Märklin oil (7149).
Changing Light Bulbs
Headlights:
Carefully lift the glass from the lantern. Pull the light bulb out of the
socket with a pair of tweezers. Insert new light bulb. Put the model back together.
Interior Lighting: Pull the light bulb out of the socket with a pair of tweezers. Insert
new light bulb.
Changing Traction Tires
Remove the old traction tire with a small flat blade screwdriver: Lift the old traction
tire out of the groove in the driving wheel. Carefully push the new traction tire over
the wheel and insert it into the groove of the wheel. Check to make sure that the
traction tire is properly seated.
Controllable Functions
Lighting
1
LV + LR
Sound effect: whistle blast 1 Sound 1
Sound effect: Squealing brakes off 2 BS
Raising/lowering pantographs, sequence
3
3
Sound
15+20
Sound: Greeting announcement 4 Sound 4+7
Sound: station announcements, sequence for Chur - St. Moritz 5 Sound 5
Sound effect: Operating sounds
1,2
6 FS
Raising/lowering pantographs, direction-dependent
1
7 Sound 21
Sound on/off 8 Sound 8
ABV, off 9
Sound effect: Short whistle blast 10 Sound 2
11
12
Sound effect: Blower 13 Sound 9
Sound: vacuum pump 14 Sound 11
Sound effect: sanding 15 Sound 15
Sound effect: Announcement 16 Sound 16
Sound effect: Announcement 17 Sound 17
Sound effect: Announcement 18 Sound 6
19
20
Sound effect: Letting off air 21 Sound 14
Sound effect: Rail joints 22 Sound 18
Sound effect: Coupling together (buffer to buffer) 23 Sound 19
1
active in analog operation
2
with random sounds
3 is turned off by Function 7