marklin 55641, Руководство пользователя

Страница: 9 / 24

9
PoM The locomotive does not have to be on the programming track for programming with PoM (Program on the Main); it can remain on the
regular track. PoM must be supported by the controller / programmer unit.
( ) Values = factory settings
* The values for the desired setting must be added! Example: The number of speed levels 28/128 = 2 + DCC operation with a braking
route = 4, results in the value = 6.
CV Discription 6021 Value DCC Value
01 Adresse 01 - 80 (64)
1 - 127 (3)
CV 29/Bit 5 = 0
02 PoM Minimum Speed — 0 - 255 (15)
03 PoM Acceleration delay 01 - 63 0 - 255 (15)
04 PoM Braking delay 01 - 63 0 - 255 (15)
05 PoM Maximum speed 01 - 63 0 - 255 (255)
08 Factory Reset / Manufacturer Recognition 08 08 (131)
13 PoM Functions F1 - F8 in analog operation — 0 - 255 (0)
14 PoM Functions F9 - F15 and lights in analog operation — 0 - 255 (1)
17 Extended address (upper part CV 29 Bit 5 = 1) — 193 - 255 (192)
18 Extended address (lower part CV 29 Bit 5 = 1) — 0 - 255 (128)
19 Multiple Unit Address — 0 - 255 (0)
21 PoM Functions F1 - F8 on Multiple Unit — 0 - 255 (0)
22 PoM Functions F9 - F15 and lights on Multiple Unit — 0 - 255 (0)
29 *
Bit 0: Reversing direction
Bit 1: Number of speed levels 14 or 28/128
Bit 2: DCC operation with braking area
Bit 5: Address length 7 Bit / 14 Bit
—
0 / 1 (0)
0 / 2 (2)
0 / 4 (4)
0 / 32 (0)
63 Volume 01 - 63 (63) 0 - 255 (255)