Marine Power S62M42C, Руководство пользователя

Страница: 18 / 44

16 www.MarinePowerUSA.com
7.
Precautions
Oil Level
Check the oil level before each engine start up and
every eight (8) hours of continuous operation. It should
be understood that internal combustion engines will
use a certain amount of oil during operation as a
cooling and lubricating agent (especially during break-
in period). Oil consumption should decrease after
approximately 100 hours of operation.
IMPORTANT: The space between the “FULL” and
“ADD” marks on the dipstick represent one quart. It is
not necessary to add oil unless the level is at or below
the “ADD” mark.
Engine dipstick level may change due to the angle of
installation. Ensure that “high” oil level is properly
marked accordingly.
When adding crankcase oil, DO NOT OVERFILL.
If crankcase is overfilled, it will cause foaming or aer-
ation of oil in the oil pan. This will effect oil pressure
which may result in severe internal engine damage.
Hydrolock
Hydrolock describes a condition in which water enters
the cylinder of an engine. Water is not compressible
and can cause catastrophic damage. Do not try to
start an engine that shows sign of having water in the
cylinders.
To remove water from engine cylinders, take the follow-
ing steps:
1. Remove all spark plugs.
2. Remove coil wire.
3. Crank engine for 15 seconds.
4. If there are any abnormal sounds STOP ENGINE
immediately and contact your MARINE POWER
dealer.
5. Change engine oil & filters.
6. Replace spark plugs and reattach coil wire.
7. Start engine. If there are any abnormal sounds
STOP ENGINE immediately and contact your
MARINE POWER dealer.