Marine Power S62M42C, Руководство пользователя

Страница: 6 / 44

4 www.MarinePowerUSA.com
instructions in the Owner’s Manual will be
warranted for the period of time before the first
scheduled replacement date for the part. If the part
fails before the first scheduled replacement,
the part will be repaired or replaced by Marine
Power at a warranty station. Any such part repaired
or replaced under warranty will be warranted for
the remainder of the period to the first scheduled
replacement point for the part.
6. Repair or replacement of any warranted part
under the warranty provisions of the article will be
performed at a warranty station at no charge to
the owner. Warranty services and repairs will be
provided at all Marine Power distribution centers
and trained marine dealers.
7. The engine owner will not be charged for diagnos-
tic labor that is directly associated with diagnosis
of a defective, emission related warranted part,
provided that such diagnostic work is performed at
a warranty station.
8. Marine Power is liable for damages to other engine
components proximately caused by a failure under
warranty of any warranted part.
9. Throughout the appropriate warranty period in the
table from the previous page Marine Power will
maintain a supply of warranted parts sufficient to
meet the expected demands for such parts.
10. Any replacement part may be used in the
performance of any warranty maintenance or
repairs and will be provided without charge to the
owner. Such usage will not reduce Marine Power’s
warranty obligations.
11. Add-on or modified parts, as defined in CCR,
Section 1900 (b)(1) and (b)(10), Title 13, that are not
exempted by the Air Resources Board will not
be used. The use of any non-exempted add-on or
modified parts by the ultimate purchaser will be
grounds for disallowing a warranty claim made
in accordance with this article statement. Marine
Power will not be liable under this statement to
warranted failures of warranted parts caused by
the use of non-exempted add-on or modified part.
12. The following parts are covered by this general
emissions warranty statement.
A) Fuel Metering System
1) Fuel Injectors
2) Fuel Pressure Regulator
3) Manifold Absolute Pressure Sensor
4) Throttle Position Sensor
5) Throttle Body
6) Coolant Temperature Sensor
7) Oxygen Sensors
8) Intake Valves
B) Air Induction System
1) Intake Manifold
2) Air Filter/Flame Arrestor
C) Ignition System
1) Spark Plugs
2) Electronic Ignition System
3) Spark Advance/Retard System
4) Ignition Coil and/or Control Module
D) Lubrication System
1) Oil Pump and Internal Parts
E) Positive Crankcase Ventilation (PCV) System
1) PCV Valve
2) Oil Filler Cap
F) Exhaust System
1) Exhaust Valves
3) Catalysts (if equipped)
G) Miscellaneous Items Used in Above Systems
1) Hoses, Clamps, Fittings, Tubing, Sealing
Gaskets or Devices and Mounting Hardware
2) Pulleys, Belts and Idlers
3) Vacuum, Temperature, Check and Timer
Sensitive Valves and Switches
4) Electronic Controls
1.
Introduction