MARIAN UCON CX, Руководство пользователя

Страница: 31 / 67

Z
Simultaneous playback
of different audio
applications via the same
playback device and
simultaneous operation of
the UCON with different
samplerates is only
possible when using the
“Standard MME Drivers
or the DirectSound.
Clock/Samplerate/Device Conflicts
As you can see in ”Important notes on
specialties of the UCON and the clock” in
chapter “The clock settings”, situations can
occur, where certain requirements to the UCON
can not be met. For example:
1. You already use “Internal Clock” for a
recording or a playback. Additionally you
wish to record from S/PDIF- or ADAT
input. For this, a switching of the clock
source would have to be done. But this
could lead to disturbing signals on the
running recording or playback. That’s why
the UCON will inhibit the usage of such
channels.
2. You already work with certain in- or
outputs of the UCON with a certain
sample rate. Now you wish to use other in-
or outputs simultaneously, but with
another sample rate. This, as well, the
UCON will prohibit, since there can only
be one sample rate worked with.
3. You play back a signal via a certain device
(e.g. “Analog 1-2”) of the UCON, and
wish to playback another via the same
device.
Using the classical MME drivers, encountering
such or an equivalent situation, which can not be
established, the driver of the UCON can inform
you about this with an appropriate error message
or warning. Oftentimes, this can be insufficient.
Some applications test all available devices of
the UCON on system startup. This test, would
certainly lead to an accumulation of such
29