Example 2 – Connection via optical ADAT port
In this example the digital output of an ADAT converter is connected with
the digital input of the UCON CX. The audio cable transmits the clock
signal simultaneously. In order to operate the UCON CX synchronously
with the ADAT converter, the option „ADAT input“ must be active. The
ADAT converter has to be configured as clock master.
Example 3 – cross connection for S/PDIF or ADAT
In this, the digital output of the UCON CX is connected to a FX unit or a
digital mixer. The digital output of the device is again connected with the
digital input of the UCON CX. If the UCON CX is supposed to be clock
master, the options „Internal Clock“ and “Clock of the digital audio inputs
is synchronized with this clock” must be active. If the FX unit or the digital
mixer have to be clock master, the option „S/PDIF Input“ or „ADAT Input“
has to be active (depending on the situation). The UCON CX then gives the
clock of the S/PDIF- or ADAT input out on the S/PDIF- or ADAT output.
54
Содержание UCON CX
