MARIAN UCON CX, Руководство пользователя

Страница: 23 / 67

Adaptable – changing the view of
the Output Control
Z
Important on this one:
Those channels are not
deactivated but simply
visually faded out!
As you know from the Mixer, there is a
“SHOW” section in the bottom left corner of the
Output Control. With click on “Analog”,
“Digital” or “ADAT” the channels of this type
can be either hid or shown.
If the UCON runs in ADAT Mode, for every
ADAT output there is one output channel. As
opposed to the channel of the optical digital
output, which is hid and deactivated.
In Non ADAT Mode all ADAT output channels
are hid and deactivated. As opposed to the
channel of the optical digital output, which is
now activated and shown. Depending on the
mode, the drop-down menus of “SOURCE” -
“Play” and “Input” – are being updated.
Now you should have an extensive overview for
your daily work with the two most important
windows of the UCON manager. For in-depth
comprehension we recommend you to read the
articles of the “hands on” part, which are of
interest to you.
21