41
To adjust the latency times of your computer
please proceed as follow:
Setting up the “USB Audio
Latency”
Z
Please note: the
smaller the latency, the
higher the system load to
the CPU of your
computer. For many
purposes, e.g. audio
editing, mixing, and
mastering, small delay
times are not relevant. In
case of such application -
field setting up a higher
latency for smaller system
load is recommended.
Connect your stereo to the analog output 1-2 at
the UCON CX.
1.
Activate “Test tone on Analog 1-2” in the
settings window
2.
Wait approx. 2 to 4 seconds to check if
distortions appear during playback
3.
If clicks and crackles appear continuously,
move the slider one position to the right. If
no distortions appear, move the slider one
position to the left.
4.
Repeat step 3 and 4, until a playback
without distortions is recurrently ensured
Depending on your computer system, you should
receive values between 2 and 8 ms for
distortion-free playback.
Содержание UCON CX
