Maretron MPOWER CLMD16 Скачать руководство пользователя страница 3

Страница: 3 / 58

____________________________________________________________

Automatic Periodic Load Turn On ................................................................................................................... 29

Turning On or Off a Circuit Based on Fluid Level .......................................................................................... 31

Timed Delay Circuit Upon Input Detection ...................................................................................................... 34

Load Timer Sequencing .................................................................................................................................... 36

“One Button Smooth Scroll” Dimmer Circuit with One or More Momentary Input ................................... 39

Lighting Dimmer Circuit with a Momentary SPDT Switch ............................................................................. 41

Single Input Load Control Sequence (CLMD16 Does Something Different each Time the Same Button is
Pressed) .............................................................................................................................................................. 43

2 Speed Windshield Wiper Control .................................................................................................................. 46

One Button Motor Speed Control (PWM) ........................................................................................................ 50

For more Information ............................................................................................................................................. 53

For Best Results Understanding CLMD16 Configuration.

Please Read This Guide Starting from the Beginning to the end.

WARNING

The CLMD16 must be wired in accordance with standards set forth by
ABYC and any other applicable regulatory agencies.

Carling Technologies is not responsible for improper wiring or installation
of CLMD16 unit(s)

Содержание MPOWER CLMD16



























































Результаты поиска

Содержание MPOWER CLMD16

Отзывы:

Бренды по названию

Популярные бренды

Maretron MPOWER CLMD16, Руководство по настройке

Результаты поиска

Содержание MPOWER CLMD16

Отзывы:

Бренды по названию

Популярные бренды