Marco 1000830, Руководство по обслуживанию

Страница: 16 / 42

SP9 ServiceManual.docx 06/02/2015 Page 16 of 42
No. 7 Sets the mode the machine works in:

SP 9 - Default

HEAT FILL (minimises temperature
fluctuations),

CONT FILL (continuous fill
– makes sure
the tank is always full but temperature
may vary),

COOL FILL (allows cooling but reduces
tank size by using ECO mode),

MANUAL (manual filling).
SP 9
No. 8 Sets temperature units on screen.
Celsius or Fahrenheit
Celsius
No.9 This sets max limit of the temperature
that user can set in USER SETUP; max value is
98.5 degrees Celsius
98.5
No.10 Press the eco button to save all the
values and reboot the machine.
-
Table 3.
10. DIAGNOSTICS:
The SP9 under counter unit is controlled by a processor-based embedded system which monitors
different aspects of the equipment. If a fault is detected, the ready light will flash red a number of
times, pause, and then repeat the flashes, as long as the fault is detected. A list of faults,
corresponding to the number of flashes between each pause, can be seen below.