Marchetti System 100x180, Инструкция по эксплуатации и техническому обслуживанию, Страница: 4 / 32

4
www.marchetti.eu
• There are two types of stabilizers: Normal-35 and Super-35.
• Normal-35 stabilizers must be always fitted inside of buildings.
• Outside the buildings they can be fitted for work platform heights less than to m 6,00 (H max tower
less than m 7,00) in wind exposed conditions.
• When the tower on wheels are mounted next to a wall (ex. building ) such as to constitute a barrier
to the wind, the Normal brackets can be mounted as an alternative to the Supers. In the latter case,
the wall-side brackets must be oriented towards the outside of the tower in a position parallel to
the wall.
• Super-35 stabilizers must be fitted to towers with work platform above m 5,00 and when the tower
is completely exposed to the wind (for example, in the middle of a square next to a structure, such
as a light pole, that does not act as a wind barrier, etc.).
Access to work platform
Access to the work platform can only take place inside the tower using one of the following methods:
- vertical rung ladder, composed of uprights on the side frames of the structure
- inclined rung ladder, internal
- inclined step ladder, internal.
Base
dimensions
Overall load
permitted ( kg)
max n° of
working
platform
H max mobile
tower EN1004 (m)
H max mobile
tower D.LGS.81
(m)
120x200 390 3 12,50 17,00
120x180 350 3 12,50 14,00
100x200 330 3 9,50 11,00
100x180 295 3 9,50 9,50
75x200 226 2 8,00 8,00
75x180 204 2 8,00 8,00