Marantz UD8004, Руководство по обслуживанию

Страница: 19 / 148

15
2. Initial setting mode
2.1. preparation
(1) Equipment used: None
(2) Unit setting: No spec other than the following procedure.
2.2. procedure
b Initialize the BD player when
μ
com, peripheral parts of
μ
com, or MAIN P.W.B. unit has been replaced in servicing.
b
All user setting will be lost and its factory setting will be restored when this initialization is made. Be sure to memorize
your setting for restoring again after the initialization.
(1) Turn on the UD8004's power. "NO DISC" is displayed on the fl uorescent tube.
(2) Press the UD8004's
1
,
5
and SOUND MODE buttons simultaneously. "INITIALIZING" is displayed on the
fl uorescent tube.
(3) The display on the fl uorescent tube switches to "INITIALIZED", the "NO DISC" display reappears and initialization is
completed.
3. μ com fi rm, H/W version, and Sereal number mode
3.1. preparation
(1) Equipment used: None
(2) Unit setting: No spec other than the following procedure.
3.2. procedure
b
System
μ
com and other
μ
com fi rm check mode.
This mode is for displaying the status of each
μ
com employed.
(1) Pressing the
5
and
1
buttons simultaneously, plug the AC cord into a power outlet.
(2) "NO DISC" is displayed on the fl uorescent tube.
(3) Press remote contraller "3265".
(4) Each time the POP UP MENU button or Cursor buttons(
d or f ) on the remote control unit is pressed, version
information of
μ
com fi rm, version of H/W and serial number is displayed one after another.
Ex.: [Sys Ver000103, Sys Day090219, Sys GEN100000………, H/W Ver000000, S/N ***************]
4. Tray lock mode
4.1. preparation
(1) Equipment used: None
(2) Unit setting: No spec other than the following procedure.
4.2. procedure
[Setting]
(1) Pressing the 1 and 3 buttons for simultaneously, plug the AC cord into a power outlet.
(2) "TRAY LOCK" is displayed on the fl uorescent tube and tray opening/closing is invalidated.
[Cancel]
(1) Unplug the UD8004's AC cord from the power outlet.
(2) Pressing the
1 and 3 buttons simultaneously, plug the AC cord into a power outlet.
(3) "PLEASE WAIT" is displayed on the fl uorescent tube and tray opening/closing is enabled.
b The tray lock mode is also canceled when the product is initialized.