Marantz UD8004, Руководство по обслуживанию, Страница: 22 / 148

18
7.3. About each mode
・
With the mode selected, press the
1
button to set that mode.
(1) Laser on/off (CD/DVD/BD) mode
Press the
8
or
9
button to select [X] and press the 1 button to set it.
Laser on/off control is executed and the laser current is displayed.
FL Display (The display part of 13 digits)
1 2 3 4 5 6 7 8 9 10 11 12 13
T 2 X m m m m n n n n
(X=1 : CD laser mode, 2 : DVD laser mode, 3 : BD(SL) laser mode, 4 : BD(DL) laser mode)
(mm.mm[mA] : Stored data, nn.nn[mA] : Current value)
b When the current value is more that ± 12.00[mA] of saved data, it becomes the pickup transducer's target.
In this case, replace the mechanism unit.
If stored value is not
FL Display (The display part of 13 digits)
1 2 3 4 5 6 7 8 9 10 11 12 13
T 2 X
― ― ― ― ― ―
n n n n
(X=1 : CD laser mode, 2 : DVD laser mode, 3 : BD(SL) laser mode, 4 : BD(DL) laser mode)
(nn.nn[mA] : Current value)
When the
2
button is pressed, the layer above the current layer is displayed. See "7.4 Stopping the mode" (page
21).
(2) Servo adjustment value display mode
Press the
8
or
9
button to select [XXX]. Refer to [Table 1 - Servo adjustment value display mode details] (page
21).
FL Display (The display part of 13 digits)
1 2 3 4 5 6 7 8 9 10 11 12 13
T X X X
(XXX : Servo adjustment value
）
Press the
1
button to set. The contents indicated on "Table 1: Details of the servo adjustment value display mode"
(page 21) are displayed.
FL Display (The display part of 13 digits)
1 2 3 4 5 6 7 8 9 10 11 12 13
T X X X m m m m m m n n
(XXX : Selection mode, mmmmmm : Address(HEX), nn:Data(HEX))
The fi rst time, the address speci fi ciation position is the uppermost position (5th place). The address speci fi ciation
position moves downwards each time the 1 button is pressed.
The address speci fi ciation position fl ashes (at an interval of about 0.5 seconds). If the 1 button is pressed after
moving to the lowermost position (10th place), the position moves to the uppermost position
Use the
8
or
9
button to change the display at the address speci fi cation position.
When the
2
button is pressed, the layer above the current layer is displayed. See "7.4 Stopping the mode" (page
21).