Marantz UD8004, Руководство по обслуживанию

Страница: 18 / 148

14
SERVICE MODE
1. Heat run mode
1.1. preparation
(1) Equipment used
:
Heat run disc (This operation may not work with any discs other than the heat run discs listed
below.)
CD
:
CD TEST DISC (TCD-HR01)
DVD
:
DVD TEST DISC (TDV-HR01)
BD
:
BD TEST DISC (TBD-HR01)
(2) Unit setting : No spec other than the following procedure.
1.2. procedure
<Playback mode>
(1) Pressing the 5 and 1 buttons simultaneously, plug the AC cord into a power outlet.
When the heat run mode is set, the "
1
" and "
3
" indicators light.
(2) Press the 5 button and open a tray.
(3) Set a disc to the tray and press the 1 button once. The " 1 " and " 3 " indicators blink at the same time and heat run
operation starts.
DVD :
After playback title-1 and title-10 of the disc, the tray opens and closes automatically, then playback the
title-1 and title-10 again.
CD/BD : The disc is played through once from title 1 through the last title, the tray opens and closes automatically,
then the disc is played through again from title 1 through the last title.
(4) This heat run operation continues automatically or it stops caused by an error. In case of some error, the following
error messages are displayed on the FL tube.
<Tray open/close mode>
(1) Pressing the
5
and
1
buttons simultaneously, plug the AC cord into a power outlet.
When the heat run mode is set, the " 1 " and " 3 " indicators light.
(2) Press the
5
button and open a tray.
(3) Set a disc to the tray and press the
1
button twice. The "
1
" and "
3
" indicators blinks alternately and heat run
operation starts.
CD/DVD/BD : After disc loading is complete, the tray opens and closes automatically, and disc loading is carried out
again.
(4) This heat run operation continues automatically or it stops caused by an error. In case of some error, the following
error messages are displayed on the FL tube.
b If the PURE DIRECT button is pressed during heat run, the repeat count of heat run operations is displayed as (Cnt
*********). Press the PURE DIRECT button once more and the display returns to its original state.
No. Error contents FL display
1 Tray Error ERROR 01
2 Bad Disc ERROR 02
3 Search Error ERROR 03
4 Read Error ERROR 04
5 Communications error ERROR 05
6 Other (Front end error) ERROR 06