Designed in Italy Assembled in China
TECHNICAL SPECIFICATIONS
PDA500P User Manual
General
DSP & Processing
Power & Amplifier Sections
Audio
Analog Input ----------------------------
Analog Output -------------------------
AD & DA Converters ------------------
Frequency Response (DSP) -----------
DSP Engine -----------------------------
DSP Resolution -------------------------
Parametric Equalization ---------------
Filter Type -------------------------------
Filter Gain -------------------------------
Center Frequency ----------------------
Filter Q/BW -----------------------------
Crossover section HPF/LPF -----------
RMS Compressor ----------------------
Peak Limiter ----------------------------
Delay -------------------------------------
1 x XLR electronically balanced, +12dB
1 x XLR electronically balanced (Link)
Cs4272 24bit
20 Hz - 20 KHz; -0.5dBu at 20 Hz and 20 kHz
Dream SAM3716, 24bit (data) x 96 bit (coeff.)
24x32 bit for filtering process; 96 bits resolution on intermediate computation results
5 filters on input channel selected as Bell or Shelving
7 filters per output channel selected as Bell or Shelving
Bell, Low/High Shelving as 1st /2nd Order
From -12dBu up to +6dBu by 0.5dBu resolution steps
Selectable with a 1/24th of octave resolution step from 20Hz up to 20kHz
Q from 0.5 up to 10 by 0.1 resolution steps
Butterworth 6/12/18/24/48dB per octave
Bessel and Linkwitz-Riley 12/18/24/48dB per octave. Filter resolution 1/24th of octave
Sophisticated Dynamic Loudness function and additional High-Pass filter per input section
All-pass filter up to 2nd order per output section
Drive from -12 to 6dBu; Threshold from -18dBu up to -12dBu; Attack time from 5ms up to 100ms;
Knee 0~100%; Ratio from 2:1 to 100:1; Release time from 40ms up to 1000ms (10ms resolution).
Threshold from -18dBu up to +12dBu
Release time from 40ms up to 1000ms (10ms resolution up to 200ms, 100ms res. up to 1000ms)
Attack time from 1ms up to 100ms (1ms resolution up to 20ms, 10ms resolution up to 100ms)
10 ms 21us increment/decrement steps per channel
8
GAIN pot. -30dBu ~ 0dBu
PRESET EQ Rotary encoder switch
Green LED (Power); Yellow LED (Limit); Blue LED (Signal presence)
1 x XLR female connector (Input)
1 x XLR male connector (Link Output)
2 x RJ45 connector (M-LAN Rs485)
2 X Locking PowerCON® 20A: AC Mains (blue) - AC Link (white)
13,99"x 2,8"x 6,11" (316x70x155mm)
3.52 lbs (1.6 Kg) / 4.96 lbs (2.5 Kg)
User Preset ----------------------------
Panel ------------------------------------
Dimensions -----------------------------
Weight, Net / Shipping ----------------
Number of Channels ------------------
Max Output Power @ 8 ohms---------
Max Output Power @ 4 ohms---------
Output Circuitry -----------------------
Output Voltage ------------------------
THD @ Rated power 4 (1kHz) -----
Signal To Noise Ratio -------------------
Frequency Response ------------------
Damping Factor ------------------------
Power Supply ---------------------------
Operating Range ----------------------
Consumption / Current draw and ---
Thermal dissipation @ 230 V
Protections ----------------------------
2
2 x 250W
1 x 1000W (Bridge)
2 x 500W
1 x 1000W (4Ω BTL Mode selected)
Class D - full bandwith PWM modulator with ultra low distortion
70 Vp / 140 Vpp (unloaded) / Bridged 140 Vp / 280 Vpp (unloaded)
<0.05% (20 Hz - 20 kHz, 8Ω load, 3dB below rated power)
>120 dB (A-weighted, 20 Hz - 20 kHz, 8 load)
20 Hz - 20 kHz ± 0,15 dB (8 load, 1 dB below rated power)
>1000 (8 load, 1kHz and below)
Switch mode power supply with PFC (Power Factor Correction) and integral standby converter
Universal Mains, 85-265V
11.2W / -A / 38.3 BTU/h (Idle)
173W / -A / 143.4 BTU/h (I/8 max. power@4Ω)
Over-Current, Over/Under Voltage, Output DC and Over-Temperature
355mm - 13,99"
155mm
6,11"
Power & Amplifier Sections
Audio
General
DSP & Processing
