Marani LPP-360A, Руководство пользователя

Страница: 30 / 40

When EQ Bypass is set as “OFF”, by pressing ENTER button in any parametric equalization page,
an arrow will appear on the left of the screen “
-> ”, then enter setting interface 1 of parametric
equalization filter:
By using “PM2” encoder, it is possible to set the flat on or off for the current parametric
equalization filter. By using “PM3” encoder, user can set the current parametric equalization
filter’s type, selectable as
Peaking_Eq/ Hi -Shelv 1/ Hi -Shelv 2/ Hi -Shelv Q/ Lo-Shelv 1/ Lo-
Shelv 2/Lo-Shelv Q/ Low-Pass 1/ Low-Pass 2/Low-Pass Q/High-Pass1/ High-Pass2/High-Pass
Q/Band-Pass/ Notch Filt/ All Pass 1/ All Pass 2
When the parametric equalization filter type is selected as Peaking_Eq, by rotaing “PM1” encoder
again, user can enter the setting interface 2 of current output parametric equalization filter:
By using “PM2” or “PM3” encoder, it is possible to set current output PEQ filter’s frequency from
the range of 20Hz to 20kHz.
By rotaing “PM1” encoder again, user can enter the setting interface 3 of current input parametric
equalization filter:
By using “PM2” encoder, user can set the gain of current parametric equalization filter from -15dB
to +15dB, and by using “PM3” encoder, it is possible to set the Q factor of current parametric
equalization filter from 0.4 to 128.
When the parametric equalization filter type is selected as Hi-Shelv 1/ Hi-Shelv 2/ Lo-Shelv 1/ Lo-
Shelv 2, by rotaing “PM1” encoder again, user can enter the setting interface 4 of current output
parametric equalization filter:
By using “PM2” or “PM3” encoder, it is possible to set current output PEQ filter’s frequency from
the range of 20Hz to 20kHz.
By rotaing “PM1” encoder again, user can enter the setting interface 5 of current input parametric
equalization filter:
Out-1 Out 1 PEQ-01
->Byp=Off Type=Peaking_Eq
Out-1 Out 1 PEQ-01
->Frequency = 20Hz
Out-1 Out 1 PEQ-01
->Gain=0.0dB Q=0.40
Out-1 Out 1 PEQ-01
->Frequency = 20Hz
Out-1 Out 1 PEQ-01
->Gain=0.0dB Q=Fixed