Marani LPP-360A, Руководство пользователя

Страница: 15 / 40

The following screen displaying the currently selected interface as TCP/IP:
When you select TCP/IP, but the DHCP is “OFF”, by pushing “ENTER” button again to set the IP
address of the unit.
By rotating “PM3” encoder, user can select the IP value, and by scrolling “PM2” to move
between available space, user can edit the IP value postion.
If select TCP/IP, and the DHCP is “ON”, press “ENTER” button one more time, the unit will
notify that the DHCP is already activated, shown as the following screen display:
IP address of the unit need to get from the router connected to the network the unit already in.
Security Sub-menu – this sub-menu allows the User to set the parameters shown, lock the
LPP-360A and set a Password therefore limiting the unit's functions and controls to those who
have only access to the appropriate Password.
Press “ENTER” button and then use the “PM1” encoder to scroll between options.

Show Parameter: Pressing “ENTER” button from the above menu will access the “Show
Parameter” Sub Menu
Press ENTER button again and use the PM2 or PM3 encoders to select between “be shown” or
“not be shown” options.
Choosing the “be shown” option means that once the unit is locked, you cannot access
parameter editing features, but they will be displayed on the LCD screen.
Choosing the “not be shown” option means that once the unit is locked, the parameters will
not be shown at all. With this option, when trying to access a parameter, the following
screen message will appear:
UTILITY MENU
-- Security Utilities --
SECURITY UTILITY
-- Show Parameter --
Parameter will
not be shown
Interface Setup
Source=TCP/IP DHCP=On
Set IP address
IP=192.168.000. 001
Interface Setup
DHCP actived !