Marani LPP-360A, Руководство пользователя

Страница: 28 / 40

By pressing ENTER in this page, an arrow will appear on the left of the screen “ -> ”, then enter
into the setting interface 1 of limiter:
By using “PM2” or “PM3” encoder, it is possible to set the limiter as “ON” or “OFF”.
By rotating “PM1” encoder, will enter into the setting interface 2 of limiter:
By using “PM2” and “PM3” encoder, user can set limiter attack threshold, with its range from -
10dBu to +20dBu.
By rotating “PM1” encoder again, it will enter setting interface 3 of limiter:
User can set limiter’s release time from 0.04 sec to 6 sec by using “PM2” encoder, and set its
attack time by using “PM3” from 0.1ms to 900ms.
HPF page – in this page, it is possible to set the High-Pass filter of output channels:
By pressing ENTER button in this page, an arrow will appear on the left of the screen “
-> ”, then
enter into the setting interface 1 of High-Pass filter:
By using “PM2” or “PM3” encoder, it is possible to set output channels’ High-Pass filter frequency
from 20Hz to 20kHz.
By rotating “PM1” encoder, it will enter setting interface 2 of High-Pass filter:
By using “PM2” or “PM3” encoder, it is possible to set the High-Pass filter’s shape and order of the
output High-Pass filter. Following is the available shape and order of the High-Pass filter:
Bypass/
Out-1 Out 1 HPF
F= 20Hz Bypass
Out-1 Out 1 HPF
->Frequency = 20Hz
Out-1 Out 1 HPF
->Slope = Bypass
Out-1 Out 1 Limiter
->Bypass = On
Out-1 Out 1 Limiter
->Threshold = +20.0dBu
Out-1 Out 1 Limiter
->Rel =0.04sec Atk =0.3ms