Marani LPP-360A, Руководство пользователя

Страница: 20 / 40

By pressing ENTER button in this page, an arrow will appear on the left of the screen “ -> ”. then
use the “PM2” or “PM3” encoder for setting “Normal” or “Invert” Phase.
RMS Cmp page – from this page, it is possible to set RMS Compressor for input channels. RMS
Compressor can be set as “ON” or “OFF” status. The following is an example screen of “ON” status:
By pressing ENTER in this page, an arrow will appear on the left of the screen “
-> ”. Then enter
into the setting interface 1 of RMS Compressor.
RMS compressor status can be set as “ON” or “OFF” by using “PM2” or “PM3” encoder.
By rotating “PM1” encoder, user can enter into setting interface 2 of RMS Compressor:
RMS Compressor attack threshold can be set with “PM2” or “PM3” encoder, with its range from
-10dBu to +20dBu.
By rotating “PM1” encoder one more time, user can enter setting interface 3 of RMS Compressor:
RMS Compressor ratio can be set by “PM2” encoder, with its range rom 2:1 ~ 32:1. RMS
Compressor knee can be set by “PM3” encoder, with its range from 0% ~ 100%.
By rotating “PM1” encoder once again, user can enter setting interface 4 of RMS Compressor:
RMS Compressor release time can be set by “PM2” encoder, with its selectable range from 0.1s ~
10s, and its attack time can be set by “PM3” encoder from 0.1ms ~ 5.0ms.
By rotating “PM1” encoder, user can enter setting interface 5 of RMS Compressor:
In-A In-A Phase
Phase = Normal
In-A: In-A RMS Cmp
Bypass = On
In-A In-A RMS Cmp
->Bypass = On
In-A In-A RMS Cmp
->Threshold = +20.0dBu
InputA: Name RMS Cmp
->Ratio =32:1 Knee =0%
In-A In-A RMS Cmp
->Rel =0.1sec Atk =0.1ms