Marani DPA240P, Руководство пользователя

Страница: 8 / 36

4.1g. If selected a Lo-Shelv_Q (variable Q Low Shelving) filter,
then the filter can be set by the following parameters
Out-[x]
EQ-[x] (up to 5 filters available)
[Freq] [Gain] [Q]
-> 1000Hz 0dB Q=1.00
[Freq.] 20Hz [Amp.] +12dB [Q] 0.30
: : :
20kHz
-12dB 20.00
4.1q. If selected an All-Pass_2 (second order, variable Q All Pass) filter,
then the filter can be set by the following parameters
Out-[x]
EQ-[x] (up to 5 filters available)
[Freq] [Gain] [Q]
-> 1000Hz ----dB Q=1.00
[Freq.] 20Hz [Amp.] ----dB [Q] 0.30
: : :
20kHz ----dB 20.00
5. Out-[x] [Name] Vu-Meter
Vu-Meter = Level
-> Vu-Meter = Level PM1 N/A Level Same as PM2
Limiter Act.
RMS Cmp Act.
6. Out-[x] [Name] Name
Name = [Name]
-> Name = _ (For Editing the Device's Name, refer to the Details on the“Utility Menus Use” Section)
7. Out-[x] [Name] Source
Source = InA
-> Source = InA PM1 N/A. InA (Channel A) Same as PM2
InB (Channel B)
InA+InB (Channel A+ Channel B)
8. Out-[x] [Name] Gain
Gain = + 0.0 dB
-> Gain = + 0.0 dB PM1 N/A -15 db Same as PM2
:
+15 dB
9. Out-[x] [Name] Limiter
A: 5ms R: 0.2s +16dB
-> A: 5ms R: 0.2s +16dB [Atk time] 5ms [Rel time] 0.1s [Amp.] -14.0 dB
: : :
200ms 3.0s +16dB
10. Out-[x] [Name] Delay
Delay = 0.000 ms
-> Delay = 0.000 ms PM1 N/A 000.0000mS 000.0000mS
[1 ms steps] [20.8 us steps]
39
9.0000mS 000.9984mS
11. Out-[x] [Name] Polarity
Polarity = Normal
-> Polarity = Normal PM1 N/A Normal Same as PM2
Invert
2 In - 4 Out Speaker Management System
ENTER
ESC
ENTER
ESC
ENTER
ESC
ENTER
ESC
ENTER
ESC
ENTER
ESC
ENTER
ESC