Maquet SERVO-i V3.1 Скачать руководство пользователя страница 79

Страница: 79 / 283

Servo

…

User´s manual

US edition
Order No: 66 00 261

Infant

Adult

Universal

Options

Audio pause/Prolong pre-silence
period/Clear latched alarm

1. Press the Audio pause (Silence/Pre-

silence alarm) key briefly, for less than
two seconds:

• Active alarms are silenced (Audio

pause) for 2 minutes.

• If already silenced, the silent period is

prolonged for two minutes.

• Latched alarms disappear (latched

alarms: the alarm text remains even
though the alarm condition ceases).

An alarm silence (Audio pause) symbol and
the remaining time are then displayed in the
message area.

Pre-silence alarm (Audio pause)

)

1. If you press the Audio pause (Silence/

Pre-silence alarm) key for more than two
seconds:

•The active alarms are silenced (Audio

pause), i.e. a two minute period is
started.

•All other alarms are silenced (Audio

pause) for 2 minutes, except those
which cannot be silenced.

–Latched alarms disappear from the

alarm message area.

SVX-5098_EN

SVX-5099_EN

Audio pause (Silence / Pre-silence alarm)

Содержание SERVO-i V3.1




























































































































































































































































































Результаты поиска

Содержание SERVO-i V3.1

Отзывы:

Maquet SERVO-i V3.1, Руководство пользователя, Страница: 79 / 283

Результаты поиска

Содержание SERVO-i V3.1

Отзывы: