manualshive.com logo in svg

Maquet SERVO-i V3.1, Руководство пользователя, Страница: 268 / 283

Поделиться
Скачать
Maquet SERVO-i V3.1 Скачать руководство пользователя страница 268

266

Servo

… 

 User´s manual

US edition
Order No: 66 00 261

13

 

Infant

     

Adult

  

 

Universal

   

 

Options

Quick access key

Suction Support

Loops

Scales

 Waveform
configuration

 Open Lung
      Tool

 Open Lung
 Tool scales

This function allows the user to disconnect the patient from the 
ventilator and turning off the alarms (for apnea, minute volume, 
frequency alarm, check tubing, EtCO2, low PEEP) during suction 
support.

Note. Suction Support is not available when NIV or O2 Breaths is 

activated.

The sweep speed, mm/s, can be set to  6, 10 or 20 mm/s (default).

Note. Open Lung Tool is not available in NIV

Possibility to increase the space viewing the waveform curves. 
This in turns means that more detailed information can be gained.

These three scales are by default set to automatic scaling.

Note. A reference loop can be saved by 
the user.

Keys

Содержание SERVO-i V3.1




























































































































































































































































































Отзывы:

Нет отзывов