Maple Armor FW106S,FW106SC, Инструкция по установке и эксплуатации, Страница: 13 / 73

Installation and Operation Manual
7
Specifications and Features
The specifications and features of the FW106S/FW106SC Control Panel are described in Table 2.
Table 2 FW106S/FW106SC Control Panel Specifications
General Digital signal processor based design, fully configurable from front panel with
password protection
Environmental

Operating temperature : 32 ‐ 120

F (0 ‐ 49

C)
 Relative humidity : Up to 93% @ 90

F (32

C)
 To be installed in normal dry indoorenvironment only
Primary Supply
 110 ‐ 120 VAC 60Hz (3.86A), or

220 ‐ 240 VAC 50Hz (1.96A)
SecondaryPower
Supply

Two 12V in series lead ‐ acid batteries set
 Charging capacity: 40AH
Power Outputs Internal power supply for
 AMI
 ALUs and Addressable Loop Circuits

NOUs and Notification Appliance Circuits
 XNUs, External Network Circuits
 ROUs
One auxiliary power supply
 Non ‐ Resettable/Resettable Power Output (configurable)
 Power limited

24VDC
 Output current: 500mA in normal standby, 1200mA in alarm

Power Factor Rating: 0.35
 Special application: Compatible devices are the Annunciator Model FW121 /
FW121C /FW122W / FW122R / FW122CW / FW122CR and IO Module Model
FW821.
 CLASS B when powering annunciator models FW121 / FW121C /FW122W /
FW122R / FW122CW / FW122CR
Relays Output

One programmable relay
 4 non ‐ programmable status relays
 Status: Alarm, Supervisory, Trouble, Monitor
 Form C Contact
 Contact Rating: 2A 30VDC

Power Factor Ration:0.35
Notification Appliance
Circuits
 Total of 4 circuits supported, total power available 8A
 2 Class A or 2 Class B circuits on each NOU

Maximum Current: 2A per NAC circuit
 Alarm Voltage: 24V nominal
 Bell code: Temporal 3
 Panel supports one regulated 24 VDC NAC, or four specialapplication24VDC NAC.
Refer to Table 20 for specific appliances/devices.

Max line loss: 1.8 V.