26
25
27
9) Insert the end of the rod in the appropriate place (38).
10) Fix the case by using the clamp on the cable conduit cover (44).
11) Mount the connector and the suction hose in the appropriate places (34) and (37). Insert the
hose by applying some pressure in order to ensure that it works properly. Insert the connector
and lock it by pulling the lower lever.
12) Insert the Maxi DES connector case into the supplied rod.
13) Put the handpiece in place on the handpiece holder (3).
14) Insert the end of the rod in the appropriate place (39).
15) Fix the case by using the clamp on the cable conduit cover.
16) Insert the connector and the suction hose in the appropriate places (33) and (36). Insert the
hose by applying some pressure in order to ensure that it works properly. Insert the connector
and lock it by pulling the lower lever.
17) Insert the Mini DES connector case into the supplied rod.
18) Put the handpiece in place on the handpiece holder (4).
19) Insert the end of the rod in the appropriate place (40).
20) Fix the case by using the clamp on the cable conduit cover.
21) Insert the connector and the suction hose in the appropriate places (32) and (35). Insert the
hose by applying some pressure in order to ensure that it works properly. Insert the connector
and lock it by pulling the lower lever.
IThe Maxi DES and Mini DES handpiece connections are interchangeable. If
needed, it is possible to invert the connections without altering the equipment's
functioning.
22) Make sure that the filter caps are inserted and
tightened properly (41)(42)(43).
23) Reassemble the lower cover (23).
24) Put the Maxenergy handpiece in place on the
handpiece holder (5).
25) Connect the connector to the relevant socket
(26) near the main switch of the equipment. For
the connection, insert the connector with the
clip (indicated by the arrow) placed upwards
and then turn it clockwise until the clip is
completely inserted, as shown in the picture.
6.4.3 Power connection
The equipment is provided with a power cable for the connection to the power supply system (see
TECHNICAL DATA).
The connection to the electric system
involves the risk of electrocution. Be
very careful of potential risk situations,
such as sockets with scorch marks, etc.
The electric system must be protected
by a residual-current device, in
accordance with the laws in force.
Connect the supplied cable to the socket (27) and then to
the power socket.
17
26