Manta DVD-053, Руководство пользователя

Страница: 30 / 40

DVD-053 –
EMPEROR PORTABLE 2
30
Divx disc compatibility with this player is limited
as follows:
1. Available resolution size of the Divx file is under
720x576 (W xH) pixel.
2. The file name of the Divx subtitle is available by 56
characters.
3. If there is impossible code to express in the Divx file,
it may be displayed as „ _ „mark on the display.
If the number of the screen frame is over 30 per secon-
d,this unit may not operate normally.
If the video and audio structure of recorded file is not in-
terleaved, either video or audio is outputted.
Playable DivX file
„.avi „, „.mpg „, „.mpeg”.
Playable Codec format
„DIVX3.xx „, „DIVX4.xx „, „DIVX5.xx „,”DIVX6.xx „
Playable Audio format
„AC3 „, „PCM „, „MP3 „, „WMA „.Sampling frequency:
within 8 - 48 kHz (MP3),within 32 - 48kHz (WMA) Bit
rate: within 8 - 320kbps (MP3), 32 - 192kbps (WMA)
Program playback (not for Picture CD/MP3)
DVD
The program function enables you to store your favouri-
te tracks from any disc in the player memory.
1. Press PROGRAM
The program menu appears.
2. Use the numerical keypad (0-9) to direct input the
titles, tracks or chapters (single track number with
digit ‘0’ in front ,for example ‘05’).
3. Move the cursor by pressing to select START.
4. To resume normal playback from programmed play-
back,Press PROGRAM and press STOP button on
the program menu.
Helpful Hint:
– Program can be activated only when a disc is in the
DVD player.
– When the program menu appears, the setup menu
setting is forbiddened.
USB and Card Readr
operation
Digital cards (MMC/SD&MS card) and USB with MP3&
Pictures (.jpg) may be played and displayed through the
unit.
MMC/SD/MS cards may be directly input through the
card reader slot. The USB Socket can be used to supply
signals to the unit from USB sources.
How to select DIGITAL USB/CARD to play
1. Turn the unit on.
2. Insert either a USB source or a Card into the appro-
priate USB connection point on the right or the MMC/
SD card reader on the left.
3. Press the „SOURCE” button on the units main panel
,select MEDIA and the units would auto detect the
USB/CARD socket.
4. If USB/CARD is selected, the unit will begin to read
the CARD or USB connected to it .