14 – EN
EN – 15
EN
5 INSTALLATION
5.1 Transport
Please follow these instructions before transporting the appliance:
WARNING!
Risk of injury when setting down the appliance due to its heavy weight!
– Wear suitable safety shoes when transporting the appliance!
– Switch off the appliance at the main power switch and unplug the power cord from
the power socket in the base of the housing.
– Only use suitable transport aids such as furniture dollies, transport dollies, hand trucks
etc. designed to take the weight of the appliance!
– The appliance should always be transported by at least two people to prevent the
device falling over during transport.
– Never tip the appliance over the long side of the base, as it could fall over and cause
injury.
– If necessary (e.g. to place a furniture dolly underneath), carefully tip the appliance only
over the short side of the base!
– Applies to models with castors: The device can be moved and pushed using the
mounted castors. Before moving, make sure that the two castors on the side with the
air inlets are not locked.
– Check the appliance for any transport damage. If you find any damage on the
appliance, please contact the customer service of your sales partner.
5.2 Positioning
Fig. 5: Positioning the appliance
Make sure that you meet the following conditions when setting up the appliance:
– Only place and operate the appliance on flat, horizontal and dry surfaces.
– Observe the load capacity of the floor. You will find the weight of the appliance
on the type label.
– Do not operate the appliance in the bathroom or in rooms with high humidity.
– Place the appliance as far away as possible from the main entrance door of the
room to be ventilated.
– Observe the optimal distance to walls and objects according to the information in
Fig.
5.
– Make sure that the air inlet and outlet on the appliance is not blocked.
– If possible, distribute a number of appliances around a room so that the air is purified
in all areas.
– Applies to models with castors:
o After you have set up the device at its destination, lock the two castors on the
air-inlet
side.
o Always place the device with its back to a wall or a room partition of comparable
stability – observing the distances recommended in this chapter, so that the device
cannot be tipped over if it is accidentally knocked.
Installation
Installation
