26 – EN
EN – 27
EN
Menu Button
Action
Back
The appliance immediately accepts your entries.
The “Back” button takes you back to the “Advanced
settings” menu. The “Back” button takes you back
to the “Settings” menu.
Menu Button
Action
Service menu
FILTER HEALTH
The “FILTER HEALTH” field displays the filter service
life and, if applicable, information about the need
for a filter change.
As an indicator, the display shows the number of
days while slowly changing from green to red.
Menu Button
Action
Service menu
In the service menu, press the “Change filter”
button for at least 2 seconds.
The button changes to green and the message “OK”
is displayed.
Menu Button
Action
Device information
The “Device information” menu shows you
information about the appliance along with contact
details for MANN+HUMMEL.
Menu Button
Action
Service menu
Advanced settings
In the service menu, tap the arrow to go to the
“Operating hours” view
The following values (in hours) are shown on the
display:
– Total operating hours
– UV operating hours
Back
The “Back” button returns you to the “Service
menu” that displays the filter health.
Menu Button
Action
Service menu
Advanced settings
In the service menu, tap the arrow to go to the
“Operating hours” view.
Change UV light bulbs
In the operating-hours view, press the “Confirm”
button for at least 2 seconds.
The button changes to green and the message “OK”
is displayed.
Back
The “Back” button returns you to the “Service
menu” that displays the filter health.
0
2500
1250 m
3
/h
0
2500
1250 m
3
/h
0
2500
1250 m
3
/h
0
2500
1250 m
3
/h
0
2500
1250 m
3
/h
7.10 Display device information
7.9 Service menu
The service menu shows you the remaining service life of the filters and the operating hours of the
appliance.
7.9.1 Show the remaining filter service life
Note
You are automatically informed when the filter elements should be changed. Under
normal conditions of use, such as in offices, medical practices, schools and
environments with regular room cleaning, it is recommended to replace both the
prefilter and the HEPA filter at least every two years (if the filter replacement is not
already indicated in the LED display beforehand). An earlier end of service life (due to
improper use and increased contamination, for example) may be manifested by a
louder operating noise or unusual odor development, among other things. In these
cases, the prefilter must be replaced before the recommended service life has been
reached.
7.9.2 Confirm filter change
After replacing the filter (see chapter 8 on page 28) you can reset the filter change indicator as follows:
7.9.4 Confirm light-bulb replacement*
After replacing the UV-C light bulbs* (see chapter 9 on page 32) you can reset their operating hours
counter as follows:
7.9.3 Display operating hours
10 of
730 days
Change filter
Confirm
i
* Applies to models with integrated UV lamps
Operation
Operation
