Manitowoc Welbilt Indigo NXT QuietQube, Руководство пользователя

Страница: 119 / 183

© Welbilt, Inc.
Symptom #2:
Quiet Qube Refrigeration Operational Analysis Table
119
Indigo NXT Ice Machine Troubleshooting
QuietQube ® - Symptom #2 – Ice Machine has a Long Freeze Cycle
QuietQube

Ice Machines Refrigeration Diagnostic Chart
Single Evaporator, Single Expansion Valve
Operational Analysis 1 2 3 4
Ice Production Published 24 hour ice production ____________________
Calculated (actual) ice production ___________________
NOTE: The ice machine is operating properly if the ice fill pattern is normal and
ice production is within 10% of charted capacity
Installation and Water
System
All installation and water related problems must be corrected before proceeding with chart.
Ice Formation Pattern
Ice formation is extremely
thin on outlet of evaporator
-or-
No ice formation on the top
of the evaporator.
Ice formation is extremely
thin on outlet of evaporator
-or-
No ice formation on entire
evaporator
Ice formation normal
-or-
Ice formation is
extremely thin on inlet
of evaporator
-or-
No ice formation on
entire evaporator
Ice formation normal
-or-
No ice formation on entire
evaporator
Safety limits
Refer to "Analyzing Safety
Limits" to eliminate all non-
refrigeration problems.
Stops on safety limit:
1 or 2
Stops on safety limit:
1 or 2
Stops on safety limit:
1 or 2
Stops on safety limit:
1
Freeze Cycle
Discharge Pressure
_______ ______ ___
1 minute Middle End
into cycle
If discharge pressure is High or Low refer to freeze cycle high or low discharge pressure problem checklist to
eliminate problems and/or components not listed on this table before proceeding.
Freeze Cycle
Suction Pressure If suction pressure is High or Low refer to freeze cycle high or low suction pressure problem checklist to eliminate
problems and/or components not listed on this table before proceeding.
_______ ______ ___
1 minute Middle End
into cycle
Suction pressure is
High
Suction pressure is
Low or Normal
Suction pressure is
Normal or High
Suction pressure is
High
Harvest Valve
Audible refrigerant flow
through valve in freeze
cycle
No audible refrigerant flow
through valve in freeze
cycle
No audible refrigerant
flow through valve in
freeze cycle
No audible refrigerant flow
through valve in freeze cycle
Suction Line
Temperature
Attach a temperature probe
on the suction line within 6”
of the shut-off valve outlet.
Record the low event at the
end of the freeze cycle.
Suction line
temperature at the suction
shut-off valve is greater
than
10
°
F (-12.2
°
C)
at the end of the freeze
cycle
Suction line
temperature at the suction
shut-off valve is greater
than
10
°
F (-12.2
°
C)
at the end of the freeze
cycle
Suction line
temperature at the
suction shut-off
valve is
less than
10
°
F (-12.2
°
C)
at the end of the
freeze cycle
Suction line
temperature at the suction
shut-off valve is
greater than
10
°
F (-12.2
°
C)
at the end of the freeze cycle
Final Analysis
Enter total number of
boxes checked in each
column.
Harvest Valve Leaking
Low on Charge
-or-
TXV Starving
Refrigerant
Overcharge
-or-
TXV Flooding
Compressor