Manitowoc S model, Инструкция по установке, использованию и уходу

Страница: 22 / 72

Installation Instructions Section 2
2-10
Part Number 000002477 3/08
Step 2 Install front support and filler panels.
A. Remove foam tape from front support location.
B. Set front support in place and install foam tape.
C. Position filler panels (align with front support),
drill and secure.
D. Install foam tape on front and back. Seal all
foam tape edges.
Step 3 Install ice deflector.
A. Locate center of ice machine drop zone (center
is 11” from left edge of ice machine to left edge
of bracket).
B. Cut and remove foam tape on the front and the
back of the bin where the deflector will be
located.
C. Remove any residual adhesive; areas must be
clean and dry.
D. Remove protective covering from double sided
tape on bottom of deflector bracket.
E. Install deflector bracket; Distribute equally to the
front and back and locate pin to the rear.
F. Apply foam tape over bracket and seal joints
with silicone sealant.
G. Refer to illustration and install deflector in
mounting bracket.
Dispenser Installation
No deflector is needed for machines that match the size
of the dispenser (30” head section on a 30” dispenser)
unless required by the dispenser manufacturer.
Adapters are required when a smaller ice machine is
going on a larger dispenser (22” machine on a 30”
dispenser).
IB0600C/IB0800C/IB1000C
Securing the Ice Machine to the Dispenser
The ice machine and adapter plate must be secured to
the dispenser to prevent tipping.
• Two holes are located in the front bottom rail of the
ice machine, to allow attachment to the adapter
plate.
• The adapter cover must be secured to the dispenser
to prevent ice from dislodging the cover during
agitation.
1. SLIDE FORWARD
2. LOCK IN PLACE WITH PIN
Important
Manitowoc Ice/Beverage Ice Machines require an
adapter for mounting. Adapters are not included
with the ice machine, dispenser or bin and must be
ordered separately. When a non-Manitowoc adapter
is used, verify the adapter is compatible with
Manitowoc Ice/Beverage Ice Machines prior to
installation.
!
Warning
The ice machine and adapter plate must be secured
to the dispenser to prevent tipping.