manualshive.com logo in svg

Manitowoc Multiplex 42 MR04, Инструкция по установке, эксплуатации и обслуживанию

Поделиться
Скачать
Manitowoc Multiplex 42 MR04 Скачать руководство пользователя страница 43

Part Number 020002365 08/25/2015 43

Section 4 

Maintenance

Back-Flow Preventer Maintenance

The integral carbonator in this unit is equipped with a 

back-flow preventer designed to protect the potable water 

supply from CO

2

 contamination. 

Important

The back-flow preventer must be checked at least once 

every year to confirm that it is functioning properly.

1.  Shut OFF power to unit.
2.  Shut OFF potable water supply to unit. Do not shut OFF 

CO

2

 supply.

3.  Remove top cover panel of unit and disconnect inlet  

fitting from back-flow preventer. 

4.  The carbonator tank is still pressurized.
5.  Observe inlet of back-flow preventer #1 check for any 

discharge. If there is no discharge, #1 check is OK. 

Proceed to step 5. If there is discharge, proceed to step 

6.

6.  Observe inlet of #2 check for any discharge. If there is 

no discharge, #2 check is OK. Proceed to step 7. If there 

is discharge, proceed to step 6.

7.  Shut OFF CO

2

 supply and relieve pressure from 

carbonator tank.

8.  Remove back-flow preventer and install new back-flow 

preventer. Turn ON CO

2

 supply and check for leaks.

9.  Check water supply strainer upstream of back-flow 

preventer. Clean out and/or replace as required.

10. Reconnect water lines and turn water supply ON.
11. Turn ON power to unit.

Shipping, Storage and Relocation

,

Caution

Before shipping, storing, or relocating this unit, syrup 

systems must be sanitized. After sanitizing, all liquids 

(sanitizing solution and water) must be purged from the 

unit. A freezing environment causes residual sanitizing 

solution or water remaining inside the unit to freeze, 

resulting in damage to internal components.

Содержание Multiplex 42 MR04





















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды