Manitowoc BH/IN 2500 Скачать руководство пользователя страница 38

Страница: 38 / 56

Part Number 4520898 Rev 7 11/15

Installation

Section 2

CONNECTING THE COMPONENTS

Read and understand all installation safety

instructions regarding Electrical and Personal

Protection.

Notice

440V Appliance: The electrician must equip the

appliance with a main power supply plug in compliance

with all applicable national and local regulations.

NOTE: Operating Conditions:

Maximum Tolerance of
Nominal Supply Voltage

+6 /-10 %

Supply frequency

50/60 Hz

To connect the components:

Warning

Ensure the control knobs are in the 0 (OFF) position

BEFORE connecting the appliance to the electrical

supply.

ON-Position

Any position
other
than “0” is
pointing to
the indicator
lamp. The
lamp is on.

OFF-Position

“0” is pointing
to the
indicator
lamp. The
lamp is off.

2. Remove all objects from the glass-top and examine the

glass.

Caution

Do not continue if the glass-top is cracked, chipped

or damaged in any other way. Contact an authorized

service agency for assistance.

3. Connect the Amphenol plug (below,

) from the

control unit to the cooktop/wok assembly:
•

The mating connectors are keyed such that the

plug can be connected in only one orientation.

•

Align the connectors and plug in the Amphenol

plug. Then rotate the locking nut on the plug

clockwise. Stop when the connectors are locked.

4. Connect the power plug (below,

) to power socket.

Never tie together the control unit cable and the

power supply cable.

Notice

To avoid radio frequency interference, route

separately the control unit cable from the power

supply cable.

6. NOTE: In some installation methods, it is required by

electrical standards to bond the appliance to the metal

chassis that it is mounted in. We recommend always

adding a bonding conductor. To identify the bond

connection, see the dimensional drawings.

7. Test the appliance. See instructions in Function Test on

page 39

Содержание BH/IN 2500

























































Результаты поиска

Содержание BH/IN 2500

Отзывы:

Похожие инструкции для BH/IN 2500

Бренды по названию

Популярные бренды

Manitowoc BH/IN 2500, Инструкция по установке, эксплуатации и обслуживанию

Результаты поиска

Содержание BH/IN 2500

Отзывы:

Похожие инструкции для BH/IN 2500

Бренды по названию

Популярные бренды